EPEIRE T-MIM
Designed to sustain intensive use, the EPEIRE T-MIM unlocks new possibilities and allow to deploy cost effective industrial strength small to medium runs additive manufacturing production.
PRINTER TYPE: EXTRUSION
SUPPORTED PELLETS: 304 & 316L, INCONEL 625 & 719, COPPER ALLOYS
IMPRESSION SIZE: 500 x 450 x 500 mm
MAX HEAD TEMPERATURE: 300°C/572°F
ACCURACY: 30μm*
THROUGHPUT: UP TO 2,500cc/h
REPEATABILITY: +/- 100 μm
NOOZLE DIAMETER: 0.2 à 2 mm*
EXTRUSION TORQUE: 6.5 Nm
ELECTRICAL POWER: 800 W
OPTIONS
UP TO 220°C / 428°F HEATED TRAY
25KG PELLET FEED HOPPER
2ND T-MIM HEAD
*according to selected heads and throughput/accuracy trade-off.
TECHNICAL FEATURES
EPEIRE T-MIM HEAD
Supported pellets: 304 and 316L Stainless Steel, 625 and 719 Inconel, Copper alloys...
The EPEIRE T-MIM unlocks access to cost effective industrial strength metal and ceramic 3D printing. Its aerospace grade reinforced stainless steel extrusion system supports highly abrasive printing feeds.
Its mechanical interlock designed to the highest standard enables the most precise feed transformations, as required by the advanced pellets metal charge (80% to 99% metal mass)
The EPEIRE T-MIM benefits from cold ventilation and sheath temperature advanced controls – so no annealing is needed. The EPEIRE T-MIM can be easily purged following the standard EPEIRE3D purge instructions*
*see user Guide
EPEIRE T-MIM
More videos, images and news on our social network feeds